This smart battery charger, model 31195, is a technical solution for charging, maintaining, and reconditioning 12-volt lead-acid batteries. Developed by Shenzhen Zhiya Technology Co., Ltd (Shenzhen, Guangdong Province, China), this device delivers a rated current of 6 amps and incorporates pulse repair technology to desulfate and extend the lifespan of old or partially degraded batteries. Equipped with a digital LCD screen, it offers a clear display of charging parameters. Compliant with European requirements (CE marking) and the WEEE directive, it contains no hazardous chemicals. Intended for automobiles, motorcycles, and other vehicles equipped with 12V lead-acid batteries, this charger is made of durable plastic material and has compact dimensions (14.8 x 8 x 5.5 cm) for a weight of 407 grams.
Detailed technical specifications:
-
Product Name: Car / Motorcycle Battery Charger.
-
Model Number: 31195.
-
Manufacturer Part Number: 23330.
-
Manufacturer: Shenzhen Zhiya Technology Co., Ltd.
-
Address: 301, No. 5 Hongchang Second Lane, Pinghu Street, Longgang District, Shenzhen, Guangdong Province, China – Postal Code 518000.
-
Phone: +86-18813982637.
-
Email: 2850738071@qq.com.
-
Authorized EU Representative: GAVIMOSA CONSULTORIA, SOCIEDAD LIMITADA (Spain).
-
Address: CASTELLANA 9141, 28046 Madrid, Spain.
-
Contact Person: Jorge Wilson.
-
Phone: +34-688185858.
-
Email: compliance.gavimosa@outlook.com.
-
Output Voltage: 12V (12-volt lead-acid batteries).
-
Rated Current: 6 amps (6A).
-
Input Voltage: Below 50V AC / 75V DC (Low Voltage Directive – safety voltage).
-
Main Material: Plastic.
-
Dimensions:
-
Length: 14.8 cm.
-
Width: 8 cm.
-
Height: 5.5 cm.
-
Weight: 407 grams.
-
Special Feature: Smart Car Battery Charger.
-
Display: Digital LCD Display.
-
Technology: Pulse Repair.
-
Chemical Composition: High-concerned chemical: None – no hazardous substances.
-
Battery Type: Lead-Acid batteries (probably AGM, GEL, SLA, Flooded).
-
Applications: Automobile (cars), motorcycles (moto), and other 12V vehicles.
-
Certifications: CE marking (European conformity for safety, health, environment), WEEE (Waste Electrical and Electronic Equipment).
Detailed features:
1. Pulse Repair Intelligent Technology:
The charger integrates an electrical pulse desulfation system. This function allows to:
-
Gradually dissolve lead sulfate crystals accumulated on the plates of batteries left in a deep discharge state or not maintained.
-
Partially recover old batteries or those that have lost their nominal capacity.
-
Extend the effective lifespan of the battery before replacement.
This technology is particularly useful for motorcycle or infrequently used car batteries (seasonal storage).
2. Smart Car Battery Charger:
The charger automatically detects the state of the connected battery (voltage, discharge level) and adapts its charging profile accordingly. Once the battery is fully charged, the device switches to maintenance mode (float / trickle) to prevent overcharging and compensate for natural self-discharge.
3. Digital LCD Screen:
The digital display allows the user to monitor critical parameters in real time:
-
Battery voltage.
-
Charging current (amperage).
-
Charging progress (in percentage or bar graph depending on the model).
-
Status indicator (charge, maintenance, repair, error).
4. Integrated Safety Features:
Although not exhaustively listed in the short technical sheet, smart chargers of this type generally include:
5. Regulatory Compliance – CE Marking:
CE (Conformité Européenne) certification attests that this product meets the essential requirements of applicable European directives regarding safety, health, and environmental protection. CE marking is mandatory for marketing within the European Economic Area.
6. WEEE Compliance (Waste Electrical and Electronic Equipment):
The WEEE symbol affixed to the product (or its packaging) indicates that this equipment must not be disposed of with unsorted household waste. At the end of its life, it must be deposited at an approved collection point for the recycling of electrical and electronic equipment, thus contributing to waste reduction and the preservation of natural resources.
7. Absence of Hazardous Substances:
The mention "High-concerned chemical: None" guarantees that the product does not contain substances of very high concern (SVHC) listed by REACH Regulation (EC) No 1907/2006, nor other hazardous chemical substances beyond regulatory thresholds.
Important Safety Instructions (excerpt from the manual):
-
Read First: Read all instructions before use. Failure to follow these instructions may result in product damage, electric shock, fire, or injury.
-
Inspect Before Each Use: Do not use the charger if the housing, cord, or plug are damaged.
-
Intended Use: Do not use the product for purposes other than those for which it was designed. Unauthorized modifications or repairs may pose safety risks and void the warranty.
-
Child Safety: Keep the device and its cord out of reach of children and pets. Small parts and packaging bags pose a risk of ingestion or choking.
-
Moisture and Electricity: Do not expose to water or moisture. Do not use with wet hands.
-
Heat and Fire: Keep away from heat sources, direct sunlight, and flammable materials.
-
Sharp Parts: Handle with care to avoid cuts or crushing.
Operating Instructions:
-
Preparation: Remove all protective films and packaging materials before first use.
-
Installation: Strictly follow the assembly and wiring instructions provided in the manual.
-
Power Management: Disconnect mains power or remove batteries when the device is not in use for an extended period.
-
Storage: Turn off the device and store it in a cool, dry place after use.
Use cases and application areas:
-
Automotive: Charging and maintenance of 12V batteries for passenger cars, SUVs, city cars.
-
Motorcycles and Scooters: Winter charging or maintenance for infrequently used two-wheel vehicles.
-
Recreational Vehicles: ATVs, snowmobiles, riding lawnmowers.
-
Boats and Marine Equipment: Starting batteries for small boats (excluding high-capacity traction batteries).
-
Workshops and Garages: Auxiliary charging for vehicle batteries under repair or awaiting service.
Target audience:
-
Motorcyclists: Battery maintenance during winter storage (motorcycle stored).
-
Motorists with infrequently used vehicles: Collector cars, summer convertibles, second cars.
-
Automotive and Motorcycle Professionals: Garages, repair shops, technical inspection centers.
-
DIY enthusiasts and owners of motorized equipment: Lawn mowers, tillers, generators.
Precautions and limitations:
-
This charger is designed for 12V lead-acid batteries only. Do not use on lithium batteries (Li-ion, LiFePO4), nickel-cadmium batteries (Ni-Cd) or other chemistries.
-
Do not attempt to charge a frozen, cracked, leaking electrolyte, or abnormally swollen battery.
-
Pulse repair technology does not work on completely dead batteries (voltage below 1-2V depending on detection threshold) or on batteries with internal short circuits or broken plates.
-
The 6 amp current is suitable for medium capacity batteries (typically 20 Ah to 60 Ah). For very small batteries (e.g., 4 Ah), check that the minimum current is appropriate.
-
The input voltage indicated "Below 50V AC" suggests a low voltage power supply (external transformer type?) or a generic safety statement. Verify the actual required mains voltage (110V or 230V) before connection.
Package Contents (typical, to be confirmed according to commercial version):
-
1 x 12V 6A Smart Battery Charger.
-
1 x Mains power cable (according to the standard of the country of distribution).
-
2 x Output cables with crocodile clips (red for +, black for -).
-
1 x User manual (containing safety information, detailed instructions, and manufacturer/EU representative contact details).
Compliance Information (EU Representative):
For customers located in the European Union, questions relating to regulatory compliance (safety, environment, REACH, RoHS, WEEE) can be addressed to the authorized representative: GAVIMOSA CONSULTORIA, SOCIEDAD LIMITADA in Madrid, Spain (contact details above).
